TM 5-6675-313-14
Table 4-2. TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
FLUORESCENT LAMPS DO NOT LIGHT.
Step 1.
Check that power cord is plugged in.
(a) If plugged in, proceed to step 2.
(b) If unplugged, plug in.
Step 2.
Check that power switch is ON.
(a) If switch is OFF, turn ON.
(b) If switch is ON, refer to organizational maintenance.
4-10. MAINTENANCE PROCEDURES.
This section contains instructions covering operator maintenance functions for
the portable film viewer.
Personnel required are listed only if the task requires
more than one.
b.
After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
INDEX
PROCEDURE
PARAGRAPH
Replace Fluorescent Lamp.. . . . . . . . . . . . . . . . . . . . . .4-10.1
4-12
