CHAPTER 2
INSTALLATION AND OPERATION INSTRUCTIONS
Section I. SERVICE UPON
6. Unpacking the Equipment
a. Remove the tape securing the packing
carton.
b. Remove the metal container with the sur-
veying target light.
c. Remove the surveying target light from
the metal container.
7. Inspecting and Servicing Equipment
a. Inspect the entire unit for loose or miss-
ing hardware and accessories.
9. General
Section II. CONTROLS
This section describes, locates, illustrates,
and furnishes the operator sufficient informa-
tion about the various controls for proper
operation of the surveying target light.
AGO 10117A
RECEIPT OF EQUIPMENT
b. Make sure all items are witih the survey-
ing target light and in serviceable condition.
c. Correct all deficiencies or report to organi-
zational maintenance,
8. Installation or Setting-Up Instructions
a. Remove the surveying target light from
its carrying case.
b. Install batteries (para 18).
c. Mount the surveying target light on the
range pole.
AND INSTRUMENTS
10. Controls and Instruments
Refer to figure 3 for the purpose
tion of all controls and instruments.
and loca.-
5
