TM 5-3610-287-24P
(3)
ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b.
PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e. vertical arrangement of letter and number combination which places the first letter or digit of each group in
order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1)
FSCM column. The Federal Supply Code for Manufacturer (FSCM) Is a 5digit numeric code used to
identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2)
PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of
its engineering drawings, specifications standards, and inspection requirements to identify an item or range
of items.
(3)
STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and FSCM columns to the left.
(4)
FIG. column. This column lists the number of the figure where the item is identified/located in Sections II
and III.
(5)
ITEM column. The item number is that number assigned to the item as it appears in the figure referenced
in adjacent figure number column.
5. SPECIAL INFORMATION.
USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as "UOC: ..... " in the Description Column (justified left) on the first line applicable item
description/nomenclature. Uncoded items are applicable to all models.
b.
ASSOCIATED PUBLICATIONS. The publication listed below pertains to the Press Section. and its
components.
Publication
Short Title
LO 5-3610-287-12
Lubrication Order: Topographic Support
System, Press Section
TM 5-3610-287-10
Operator's Manual, Topographic Support
System , Press Section
TM 5-3610-287-24
Maintenance Manual, Topographic Support
System , Press Section
TM 5-3610-287-10-HR
Hand Receipt: Topographic Support
System, Press Section
7
