TM 5-3610-287-10
1-8.
GENERAL (CONT)
b. Electrical System. The Section electrical system provides ac and dc
power for the Printing Press and support equipment within the Section.
The Section electrical system is controlled by the MAIN 60Hz. POWER
switch which controls all power coming into the Section from an external
power source. The phase monitor meter monitors electrical power phase and
The load center consists of the circuit breaker control panel and
electrical wiring and housing. The load center contains individual circuit
breakers which allow the operator to switch power on and off to Section
equipment. The main circuit breaker switches off all circuit breakers.
The 100-foot power cable transfers 120/208 Vac to the Section from an
external power source while the Section is stationary. A ground cable,
connecting the Section to the ground rod, grounds the Section and its
internal and external equipment.
1-15