Section IV. REMARKS
Only repair is replacement of defective cap.
Adjustment to roller guide rails maybe needed after replacement of
Unit service consists of buffing scratches from the surface of the
Replacement or repair of cover plate assembly should be done when
needed to adjust side play of cylinder.
Adjustment may be made by adding or removing shims.
Repair consists of replacing starter and fluorescent lamp only.
Unit repair consists of replacement of gripper pads and pull rods only.
Unit repair consists of replacement of electromagnetic clutch only.
Unit repair limited to gripper pads and oil fitting replacement.
Perform safety test prior to operation.
Unit repair is limited to bearing assembly replacement.
Crew repair consists of replacing items commonly used during normal
All internal suction head parts replaced by depot only.
Crew repair is limited to feeder tape replacement.
Unit repair to pile lift motors is limited to replacement of magnetic
All internal compressor parts replaced at depot.
Disconnect power before working with electrical components.
Complete disassembly of main control box is limited to depot
Use Hiedelberg commercial manual for depot repair.