TM 5-3610-286-20
2-89.
Pile Lift Control Switches (cont).
c. Install.
(1) Pile lift control switches. (figure 2-249)
WARNING
Hazardous electrical voitages exist within printing press. Do not connector
disconnect any electrical components whiie power is on. Death, serious
electrical shock, or burns may result.
(a) Replace cable (1) and attach tagged leads to microswitch (2). Remove tags.
(b) Replace microswitch casing (3), microswitch (2), drawer frame (4), and two slotted
screws (5).
(c) Replace switch (6) and two slotted screws (7).
(d) Replace cable (8) and tighten collar (9).
(e) Replace tagged leads (10) and tighten two cross-head terminal screws (11). Remove
tags.
(f) Close switch cover (12) and tighten two cross-head screws (13).
2-504
