TM 5-3610-285-14
b.
Loosen setscrew and remove TRANSPORT SPEED control knob.
c.
Remove screws and front control panel.
d.
Remove mounting screws and switch enclosure.
e.
Tag and disconnect wiring from defective switch.
f.
Remove switch from enclosure by depressing retaining clips and sliding through enclosure.
g.
Replace switch into enclosure. Reconnect wiring to proper position.
NOTE
Be sure ground wire is reconnected to enclosure mounting screw.
h.
Reinstall switch enclosure and ground wire. Retain with screws.
i.
Reinstall front control panel and retain with screws.
j.
Reinstall TRANSPORT SPEED control knob and tighten setscrew.
k.
Turn on processor circuit breaker.
5-135
