TM 5-3610-285-14
INDEX
PROCEDURE
PARAGRAPH
Replace Latch . .................................................................................................................................... 4-16.1
Remove/Install Water Tank ................................................................................................................. 4-16.2
Remove/Install Sink . ........................................................................................................................... 4-16.3
4-16.1 Replace Latch.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Combination Wrench Set
SUPPLIES: Flush Cup-Type Latch
a.
Remove nut and lockwasher from shaft.
b.
Remove latch rod actuator and two latch rods.
c.
Remove nut and housing.
d.
Remove handle/shaft and cup.
e.
Install new cup handle/shaft.
f.
Install new housing. Be sure alinement tabs on housing are inserted in notches cut in door. Attach housing,
finger tight, with nut.
g.
Reinsert latch rods into guides located at top and bottom of door.
h.
Reinstall latch rods on upper and lower actuator pins and secure actuator against housing with lockwasher and
nut.
4-17
