TM 5-3610-259-14
c.
Support table top assembly.
d.
Loosen, but do not remove socket head setscrew.
e.
Remove center bolt and washer.
f. Remove bolts, washers, lockwashers, and nuts, and remove defective
pillow block assembly.
g.
Install new pillow block assembly, and secure with nuts, lockwashers,
washers, and bolts.
h. Grease bearing (Paragraph 5-11.1).
i.
Reinstall washer and center bolt.
j .
Tighten socket head setscrew.
k. Remove table top assembly supports.
5-31
