TM 5-3610-259-14
4.4.2.1 REPLACE LATCH.
TOOLS :
Tool Kit
1.
Remove nut and lockwasher
2.
Remove latch rod actuator
3.
Remove nut and housing.
from shaft.
and two latch rods.
4.
Remove latch/shaft and cup.
5.
Remove lock retaining nut and lock.
6.
Install new lock and attach to door with lock retaining nut.
7*
Install new cup and latch/shaft.
8.
Install new housing.
Be sure alinement tabs on housing are inserted
in notches cut in door.
Attach housing, finger tight, with nut.
9.
Reinsert latch rods into guides located at top and bottom of door.
Reinstall actuator on shaft with pins facing front door. Reinstall
latch rod ends on upper and lower actuator pins, and secure actuator
against housing with lockwasher and nut.
4-11
