TM 5-3610-259-14
WARNING
If platemaker has been used recently, the glass light shield will be extremely
hot, and may cause serious burns.
To prevent injury, use gloves or rags when
removing glass light shield.
(3) Using white gloves, carefully remove glass light shield and store in glass
holder on wall.
(4) Reinstall two hex head screws and clamps on each side of reflector.
(5) Rotate glass frame into horizontal position and lock into place with frame
release knob.
c.
Rotate two vacuum frame holddown brackets on corners to lock vacuum frame in
place.
d. Removal of metal halide exposure lamp.
(1) Remove safety screw from lower cabinet door.
(2) Turn door knob and open lower cabinet door.
2-25