TM 5-3610-257-14
b.
Remove raceway cover.
c.
Inspect wires for damage.
NOTE
Refer to direct/general support maintenance for wiring repair if necessary.
d.
Loosen wiring and carefully pull it from the entire base section.
e.
Remove screws and base from wall.
f.
Mark and measure damaged area on raceway. Record measurement.
g.
Cut damaged area from raceway.
h.
Cut section from new raceway to the length recorded in step f.
i.
Using damaged area as a template, mark mounting holes on new piece.
j.
With a number 25 drill bit, drill holes in new raceway.
k.
With file, remove all burred edges.
l.
Paint base section as required.
m.
Reinstall raceway base on wall with screws.
n.
Carefully place wiring back in raceway base.
o.
Reinstall cover on base.
p.
Test wiring with power on.
1-84
