TM 5-3610-257-14
e.
Slide out plexiglass.
f.
Remove bezel nut and label from power switch.
g.
Remove defective power switch from inside board and disconnect wiring.
h.
Reconnect wiring to new power switch.
i.
Adjust nut so that power switch will protrude through top enough to operate properly.
j.
Reinstall label.
k.
Reinstall bezel nut.
l.
Reinstall plexiglass.
m.
Reinstall glass.
n.
Replace spacers edge piece and screws.
o.
Plug in power cord.
7-18
