TM 5-3610-257-14
c.
Remove ribbon cable connectors.
d.
Tag and disconnect wires from terminal.
e.
Disconnect green wire.
f.
Remove defective power supply board assembly.
g.
Install new power supply board assembly and reconnect green wire.
h.
Reconnect wires to terminals and remove tags.
i.
Aline pins on ribbon cable connectors with holes in sockets.
j.
Apply even pressure to seat connectors.
k.
Install chassis cover.
l.
Install densitometer (paragraph 4-20.1).
m.
Adjust densitometer (paragraph 4-6.2).
4-50
