TM 5-3610-253-14
8-16.6 Replace Leg Support(s).
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
Cross Tip Screwdriver
SUPPLIES: Right Leg Support
Left Leg Support
a.
Remove screws holding leg support.
b. Remove screws holding leg hinge.
c.
Replace hinge, aline holes and install screws. Tighten firmly.
NOTE
Leg supports are for right or left sides.
Supports are not interchangeable.
d. Replace leg support, aline holes, and replace screws. Tighten firmly.
e.
Move table to stored position.
Check for free movement of hinges and
leg supports. Lock legs.
Surface should not wobble.
8-11
