TM 5-3610-253-14
Section II OPERATING INSTRUCTIONS
8-4. DESCRIPTION AND USE OF OPERATOR’S CONTROLS AND INDICATORS.
This equipment has
no operator’s controls or indicators.
8-5.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES.
There are no operator
PMCS procedures assigned for this equipment.
8-6.
OPERATION UNDER USUAL CONDITIONS.
8-6.1 Preparation for Movement.
Ensure that portable equipment is properly secured
with tiedowns provided.
8-7.
OPERATION UNDER UNUSUAL CONDITIONS.
This equipment is designed for operation
only in a controlled environment.
Section III OPERATOR MAINTENANCE
8-8.
LUBRICATION INSTRUCTIONS.
This equipment does not require lubrication.
8-9.
TROUBLESHOOTING PROCEDURES.
There are no operator troubleshooting procedures
assigned for this equipment.
8-10. MAINTENANCE PROCEDURES.
This section contains instructions covering operator maintenance functions
for the furniture and cabinets.
Personnel required are listed only if the task
requires more than one.
b. After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
8-10.1 Inspect Furniture and Cabinets.
Inspect furniture and cabinets for
structural damage, rust, and proper operation of all latches, hinges, drawer slides,
and adjustment mechanisms.
8-3
