TM 5-3610-252-14
a.
Drill pop rivets from hinged cover to remove vent cover.
b. Remove defective vent cover and transfer mounted hardware to new cover.
WARNING
Dry cleaning solvent, P-D-680, used to clean parts is potentially dan-
gerous to personnel and property.
Avoid repeated and prolonged skin
contact.
Wear solvent-impermeable gloves and eye/face protective
equipment when using solvent.
Do not use near open flame or excessive
heat.
Flash point of solvent is 100°F to 138°F (38°C to 59°C).
c.
Scrape gasket off van body and clean area with solvent P-D-680.
d. Secure new gasket to van body with adhesive.
e.
Aline ventilation fan vent cover and pop rivet to hinge.
f. Test cover for tightness of closure.
1-73
