LUBRICATION ORDER
LO 5-6675-328-12
13 SEPTEMBER 1983
TOPOGRAPHIC SUPPORT SYSTEM
MAINTENANCE SECTION
MODEL ADC-TSS-7
NSN: 6675-01-105-5757
Reference TM 5-6675-328-14 and C9100-IL
preservation precautions have been taken. The lowest level
Intervals and the related manhour times are based on normal
of maintenance authorized to lubricate a point is indicated by
operation. The manhour time specified is the time you need
one of the following symbols: Operator/Crew (C) and
to do all the services prescribed for a particular interval.
Organizational Maintenance (O). Clean all fittings, plugs, and
Decrease the interval and lubricate more frequently if your
caps before removal and/or lubrication. Remove all excess oil
lubricants have been contaminated or you are operating
or grease after lubrication. If possible, exercise moving parts
under adverse conditions, including longer - than - usual
to distribute lubricant evenly. Lubricate all oil can points after
operating hours. The intervals between lubrications may be
washing or fording.
extended during periods of low activity, but only if adequate
LUBRICANT INTERVAL
INTERVAL LUBRICANT
and 4)
and 4)
and 4)
CARD 1 OF 2
