LUBRICATION ORDER
LO5-6675-321-42
16 SEPTEMBER 1983
TOPOGRAPHIC SUPPORT SYSTEM
MOSAICKING/DRAFTING SECTION
MODEL ADCTSS10
NSN: 6675011066815
Reference TM 5-6675-32114 and
C9100-IL
vation precautions have been taken The lowest level of
Intervals end the related manhour times are based on normal
maintenance author zed to lubricate a point is indicated by
operation. The manhour time specified is the time YOU need
one of the following symbols: Operator/Crew (C) and
to do all the services prescribed for a particular interval. De-
Organizational Main terrance (0). Clean all fittings, plugs,
crease the interval and lubricate more frequently if your lu-
and caps before removal and/or lubrication. Remove all
bricants have been contaminated or you are operating under
excess oil or grease after lubrication. If possible, exercise
adverse conditions, including longer - than - usual operating
moving parts to distribute lubricant evenly. Lubricate
hours. The intervals between lubrications may be extended
all oil can points after washing or fording.
during periods of low activity, but only if adequate preser-
CARD 1 OF 2
