LUBRICATION
LO
5-3610-286-12
ORDER
(Supersedes LO 5-3610-286-12, 6 January 1986)
20 January 1988
TOPOGRAPHIC SUPPORT SYSTEM PRESS SECTION
PRINTING PRESS MODEL SOR
Distribution is unlimited.
Reference TM 5-3610-286-10 TM 5-3610-286-20
Intervals (on-condition or hard time)
Dotted oil points indicate lubrica-
tion on both sides of equipment.
and the related work-hour times are
Remove all excess oil or grease
based on normal operation.
The work-
hour time specified is the time you need
after lubrication. The lowest level
to
authorized
maintenance
to do all services prescribed for a
of
particular interval.
On-condition (OC)
lubricate a point is indicated by
one of the following symbols as
oil sample intervals shall be applied
Operator/Crew (C) and
unless changed by the Army Oil Analysis
appropriate:
(O).
Program (AOAP) laboratory.
maintenance
Organizational
Change the
Reporting errors and recommending
You can help improve
are contaminated or if you are operating
improvements.
the equipment under adverse operating
If you find any mistakes
this LO.
or if you know of a way to improve
conditions, including longer-than-usual
operating hours. The hard time interval
the procedures, please let us know.
may be extended during periods of low
Mail your letter or DA Form 2028
activity.
If extended, adequate pre-
(Recommended Changes to Publications
servation precautions must be taken.
and Blank Forms) direct to:
Hard time intervals will be applied in
Commander, US Army Troop Support
the event AOAP laboratory support Is not
AMSTR-MCTS, 4300
Command, ATTN :
available.
Clean parts with dry clean-
Goodfellow Boulevard, St. Louis,
ing solvent (SD), type II or equivalent.
MO 63120-1798. A reply will be
Dry before lubricating.
furnished to you.
INKING ASSEMBLY
INTERVAL q LUBRICANT
LUBRICANT q INTERVAL
Ink
Fountain
Roller OGP q M
Oil Fitting (C)
W q (OGP Manual
Inking
Roller
Spring
Guides
(each
side) 1 Oil Can Point
(c)
Ink Ductor Roller Levers GAA q M
(each side, under Duct or
Journals) 1
Roller
Crease Fitting (C) (See
Note 2)
CARD 1 OF 10