TM 5-6675-328-14
Table 3-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - C ont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
ITEM
IN-
Reporting,
NO.
TER-
Equipment Is
VAL
PROCEDURE
Not Ready/
Available If:
DRILL PRESS - Cont
1
B
Inspect Drill Press - Cont
2.
Check for loose knobs, bolts, and screws.
3.
Attach foot controller and plug in power cord.
WARNING
Grinding and drilling operations may result
in blindness if eye protection is not worn.
Rotating and spinning equipment may snag
loose clothing, hair, or jewelry resulting
in severe personal injury.
4.
Turn power on and verify proper motor operation.
5.
Turn power off.
2
A
Service Drill Press.
1.
Unplug power cord.
2.
Wipe surfaces clean with cheesecloth.
3-7