TM 5-6675-325-14
f. Remove screws and top thermal roller brace.
g.
Remove screws and circuit board assembly,
h. Remove top blanket springs and top blanket from heater shoe assembly.
i.
Pull defective heater ropes from end terminals.
j.
Install new heater ropes.
k. Push new heater ropes into end terminals and seat with small
screwdriver.
l.
Reinstall top blanket and secure with top blanket springs.
m.
Reinstall top thermal roller brace
n . Reinstall circuit board assembly.
o.
Slide in thermal roller and secure
p.
Reconnect thermal roller harness.
q.
Reinstall turnaround.
r.
Close left side panel.
s.
Plug in power cord.
3-106
and four screws.
with screws.