TM 5-6675-325-14
i.
Run reader-printer through two cycles, observing operation of mirror
drive chain.
Readjust tension if required.
j.
Remove disabling device from rear interlock.
k. Reinstall rear panel.
3-16.14 Adjust Timing Belts.
MOS: 41B, Topographic Instrument Repair Specialist
TOOLS :
Socket Wrench Set, 1/4 in. Drive
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Unplug power cord.
NOTE
Left and right on reader-printer are taken when viewed from front.
b. Open lower right side panel.
c.
Disable door interlock by depressing operating arm.
3-86