TM 5-6675-324-14
Remove top right panel.
d.
Raise holddown clamps.
e.
Unplug connectors.
f.
slowly lift developing assembly up and remove it.
9"
Place assembly on desk covered with paper to keep foreign matter
h.
from being attracted to developing cylinder.
Open hopper lid and remove interior lid.
i.
Turn developing assembly over and empty contents of hopper into p lastic
j.
bag and discard.
Remove screws.
k.
Remove dust guard and blade.
1.
Use lens cleaning tissue to remove all residue from developing
m.
cylinder and blade.
Tighten screws.
Reinstall blade.
n.
CAUTION
Remove oil from feeler gages to avoid contaminating developing cylinder.
3-197