TM 5-6675-324-2
Control or Indicator
Function
Copy Number Display
Displays desired number of
copies as set via key strip.
It counts down by one from
total. After copy run is
finished, it displays number
of copies originally set. If
COPY START key is not pressed
within 30 sec of selecting
number of copies, it returns
to 1.
Key Strip/Clear Key
Press keys 1-0 to input num-
ber of copies required.
(Maximum number of copies per
run is 99.) Pressing clear
key (C) returns number of
copies to 1.
WAIT/STANDBY Indicator
Flashes when temperature of
fuser roller is lower than
required and copying is not
possible (wait period).
Afterward, it glows steadily
to indicate that correct tem-
perature has been reached
(standby period).
COPY STOP Key
If pressed during continuous
copy run, copying process is
stopped after finishing copy
in progress.
COPY START Key
Initiates copying process.
Power Switch
All circuits in copier are
activated only when this
switch is set to 1. If there
is no copying action or input
NOTE
via key strip for 30 rein,
switch is automatically moved
Even with switch at O,
to O position by auto shutoff
some circuits are still
function. Switch should be
active, so copier should
reset to 1 to reactivate
be left plugged in.
copier.
3-42