TM 5-6675-319-14
10-16.5 Remove/Install Supply Cabinet.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: 1/4 in. Socket Set
1/4 in. Socket Extension, 6 in. long
11/32 in. Combination Wrench
Cross Tip Screwdriver
SUPPLIES: Supply Cabinet
a. Remove bolts and washers holding cabinet to wall.
b. Remove caps and lag bolts holding mounting bracket to floor and remove cabinet.
c. Remove screws, Iockwashers, nuts, mounting brackets, and spacers from cabinet. Retain mounting
brackets and spacers for use on new cabinet.
d. Position spacers and mounting brackets on new cabinet. Install but do not tighten screws,
Iockwashers, and nuts.
e. Place new cabinet in position and install, but do not tighten lag bolts.
f. Secure cabinet to wall with Iockwashers and bolts.
g. Tighten the bracket retaining bolts and nuts.
h. Tighten bolts holding mounting brackets to floor, and install the caps.
Change 1
10-9