TM 5-6675-319-14
(3) Perform steps (3) through (7) in paragraph 9-16.7a.
(4) Tag and desolder fuse holder wiring.
(5) Remove nut and defective fuse holder.
(6) Install new fuse holder and secure with nut.
( 7 ) S o l d e r w i r i n g t o f u s e h o l d e r.
(8) Perform steps (11) through (16) in paragraph 9-16.7a.
d . R e p l a c e v o l t a g e r e s i s t o r.
( 1)
( 2)
( 3)
(4)
Turn off MASTER POWER switch.
T u r n o f f c i r c u i t b r e a k e r .
Remove screws and cover.
Disconnect voltage resistor wires from terminal posts 5 and 11.
NOTE
Before installing new resistor, be sure all wires are properly connected
to terminal posts.
9-97