TM 5-6675-318-14
Table 1-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annually
(Number) - Hundreds of Hours
B - Before
W - Weekly
S
- Semiannually
D - During
M - Monthly
BI - Biennially
A - After
Q - Quarterly
For Readiness
ITEM TO BE INSPECTED
IN-
Reporting,
lTEM
Equipment Is
TER-
PROCEDURE
NO
Not Readyl
VA L
Available If:
VAN BODY - Cont
1
Inspect Exterior - Cont
B/D/
Lock dis-
10.
I n s p e c t front and rear van body locks to be sure
engaged.
A
locks are fully engaged.
Inspect gaskets on personnel doors for leaks or
11.
Q
damage.
W
11.1 Inspect hinges for proper placement of hinge pins.
M i s s i n g hinge
pins.
Clean and paint blistered, pitted, or flaking
12.
Q
a r e a s and bare metal spots in accordance with
instructions contained in TM 43-0139, Painting
Instructions for Field Use.
2
Inspect
Interior.
Emergency
B/D
Test emergency lights by pressing test button.
1.
lights do
not light.
W i r e s or
Inspect power cords and cables to be sure wires
W
2.
cables are
are not kinked, cut, or cracked.
c r a c k e d or
cut.
I n s p e c t plug connectors to be sure all plug
W
3.
connectors are tight and firmly seated. Tighten
if necessary.
Inspect for burned out light bulbs and
D
4.
Replace as required.
fluorescent lamps.
Leaks are
W
5.
Inspect walls, ceiling, and floor for holes,
present.
o p e n seams, or signs of seepage or leaks.
Hinge,
Check storage cabinets for broken hinges,
D
6.
latch, or
latches, and locks.
lock is
broken.
Change 2
*U.S. GOVERNMENT PRINTING OFFICE: -554-030/80192