TM 5-6675-317-14
(5) Set ZOOM CONTROL knobs to 1X, STRETCH DIRECTION levers to 1X and STRETCH
DIRECTION dial to O.
(6) Set VIEWING MODE switch to STEREO.
(7) Illuminate right and left photographs.
(8) Rotate IMAGE ROTATION dial and move photographs until images are in
stereoscopic orientation.
(9) Set ZOOM CONTROL knobs to 3X.
(10) Adjust IMAGE ROTATION dial and photographs for best stereoscopic orienta-
tion.
(11 ) Set ZOOM
(12) Continue
obtained.
and
CONTROL knobs to 7X.
to adjust IMAGE ROTATION dial and photographs until best view is
NOTE
Good stereoscopic image at high magnification will be retained throughout
entire zoom magnification range. -
(13) Set VIEWING MODE
(14) Illuminate map.
switch to MONO.
(15) Select three or more different points at the same elevation, both on map
photograph, and match scale of photograph to map. .
NOTE
Rotate map for alinement.
Do not use IMAGE ROTATION dial.
3-26