TM 5-6675-316-14
NOTE
Basic procedures for operating machine are found in the following paragraphs.
Those basic operations, such as use of various drafting tools or accessories,
that are common to several operating procedures, are located in appropriate
tables and/or procedures. Procedure a, below, must be performed prior to any
other procedure.
Preparation for Operation.
(1) Turn on XY display and fluorescent lights. If machine is to be used in automatic mode, depress power
button on X-carriage or DSP machine controller.
Check that all cables are connected.
(2) Press white reset button on digitizing keyboard. Check that both numbers in display read( ± 000,0000.
(3) Check that glass top is clean. Attach paper or any other drafting medium to be used by taping to table
surface at corners.
(4) If machine is to be used initially in manual mode, proceed as follows (if not, proceed to step 5).
Change 1
3-59