TM 5-6675-316-14
11-16.2 Replace Door Latch (Wall storage Cabinet).
MOS: 41B, Topographic Instrument Repair Specialist
83FJ6, Reproduction Equipment Repairer
TOOLS: 9/16 in. Combination Wrench
Flat Tip Screwdriver
SUPPLIES: Handle Type Latch
a.
Remove
b. Remove
c.
Remove
d. Remove
e.
Loosen
f. Remove
holding plate retaining nut.
holding plate and latch rods.
side latch plate.
handle retaining nut.
setscrew and remove bushing from handle shaft.
two handle retaining screws and remove handle.
g.
Install new handle and secure with two screws.
h. Reinstall
i.
Reinstall
j. Reinstall
k. Reinstall
l.
Reinstall
11-6
bushing on handle shaft and tighten setscrew.
handle retaining nut.
side latch plate.
latch rod holding plate and latch rods.
holding plate retaining nut.