TM 5-6675-316-14
8-10. MAINTENANCE PROCEDURES.
This section contains instructions covering operator maintenance functions
for the adhesive wax coater.
Personnel required are listed only if the task
requires more than one.
b. After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
INDEX
PROCEDURE
PARAGRAPH
Adjust Doctor Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10.1
Adjust Roller Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10.2
8-10.1 Adjust Doctor Bar.
MOS: 81C, Cartographer
TOOLS: Thickness Gages 0.006 in. (2 required)
Flat Tip Screwdriver
Cross Tip Screwdriver
WARNING
Serious injury may result if internal components are touched when heat is on.
Remove heat source and allow to cool, or wear protective clothing before
servicing.
a.
Lift off top deck cover and top roller cover.
8-32