TM 5-6675-316-14
(1) Check that you are in manual mode. (Press CONTROL and M.)
(2) Press CONTROL, o and tab number. Then press TAB.
(3) Typesetter starts tab job with information stored in selected tab.
(4) Starting position can be changed by pressing CONTROL, o, and appropriate
two-digit tab number. Then press TAB.
1. Justification. There are two modes available with composing machine.
Automatic
Manual
(1) The automatic mode is always active when composing machine is turned on or
if RESET and DATA are depressed.
2-118