TM 5-6675-313-14
d.
Loosen, but do not remove socket head setscrew.
e.
Remove
f.
Remove
pillow
center bolt and
bolts, washers,
block assembly.
g.
Install new pillow block assembly and secure with nuts, lockwashers,
washer.
lockwashers, and nuts; remove defective
washers, and-bolts.
h.
Grease bearing (Paragraph 2-11.1).
i.
Reinstall washer and center bolt.
j.
Tighten socket head setscrew.
k.
Remove table top assembly supports.
2-33