TM 5-3610-286-20
2-92.
Electronic Control Box.
This task covers:
Replace
INITIAL SETUP
Tools
0.050 x 0.375 x 8 in. flat-tip screwdriver
Replace. (figure 2-258)
(1) Tag and remove timing disc lead (1).
(2) Tag and remove three connecting leads to sensors (2).
(3) Remove connector at terminal (3)
(4) Remove two slotted screws (4) and washer (5).
(5) Remove and replace electronic control box (6).
(6) Install electronic control box (6), two washers (5), and slotted screws (4).
(7) Install connector at terminal (3).
(8) Install three connecting leads from sensors (2) and remove tags.
(9) Install timing disc lead (1) and remove tag.
2-522