TM 5-3610-286-20
2-89.
Pile Lift Control Switches (cont).
(2) Feeder guard. (figure 2-250)
(a) Install guard (1).
(b) Install gage panel (2) and install one slotted screw (3).
(c) Install two slotted screws (4) in feeder (D/S).
(d) Install four hex-head screws (5) in feeder (D/S).
(e) Install three slotted screws (6) in feeder (press end).
(f) Install two hex-head screws (7) inside feeder.
(g) Install connector (8) and tighten connector clamp.
(h) Install two hoses (9) and tighten hose clamps (10).
2-506