TM 5-3610-286-20
2-77.
Gear Box Assembly (cont).
(2) Assembly.
(a) Pinion gear and drive shaft. (figure 2-211).
1
2
3
4
5
6
7
8
Replace bearing (1) and retaining ring (2).
Replace bushing flange (3) and four socket-head screws (4) on casing (5).
Replace keys (6).
Replace spacer (7) and retaining ring (8).
Replace pinion gear (9) on shaft (10) and aline with, and slide gear onto, the key
(6) closest to the shaft pinion gear.
Replace pinion and drive shaft assembly (10) through hole in casing (5) and seat end
of shaft in bearing (1).
Replace bearing (11).
Replace locator pin (12), bearing flange (13), four washers (14), and socket-head
screws (15).
2-428