Figure 2-183.
TM 5-3610-286-20
Impression Cylinder Control Mechanism (cont).
2-69.
(2) Adjustment, impression OFF, manual. (figure 183)
(a)
(b)
(c)
(d)
Using manual lever, put press in Impression OFF.
Inch press forward until roller (1) comes to a stop at the highest point of cam (2).
Check that bolt (3) contacts the lower run of the recess (4) in side frame.
NOTE
If bolt does not contact lower run of recess, adjust engaging lever (D/S)
(para. 2-36.).
Measure the distance between pawl (5) and plate (6). Adjust to between 0.15 mm and
0.20 mm using shims if required.
(3) Electromagnetic switch alinement. (figure 2-184)
(a) With main power switch ON, press Impression ON pushbutton.
2-382