TM 5-3610-286-20
2-57.
Gripper System Assembly (cont).
b. Repair. (figure 2-125)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Remove twelve hex-head cap screws (1), twelve gripper pads (2), and twelve nuts (3).
Remove three “E” clips (4), three washers (5), three pins (6), three compression
springs (7) and compression rod guides (8).
Remove three grease fittings (9) from gripper bar (10).
Replace weak or broken compression springs (7), damaged or missing gripper pads (2),
and missing or clogged grease fittings (9).
Replace three grease fittings (9) in gripper bar (10).
Replace three compression springs (7) on compression rod guides (8) and replace
assembly on gripper bar (10) by replacing three pins (6), three washers (5), and three
“E” clips (4).
Replace twelve gripper pads (2), twelve hex-head cap screws (1), and twelve nuts (3).
2-288
