TM 5-3610-286-20
2-46.
Plate Clamp.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
6 mm hex key
Plate cylinder guard removed
17 mm combination wrench
(TM 5-3610-286-10)
Plexiglass guard covered with map stock or
newspaper to keep it clean
a. Remove. (figure 2-94)
(1) Remove four socket-head screws (1), washers (2), two retainer bars (3), and two spacer
blocks (4).
(2) Remove six socket-head screws (5), six washers (6), and clamp (7).
2-230