TM 5-3610-286-20
2-37.
Dampening Fountain Assembly.
This task covers:
a. Replace
b. Repair
INITIAL SETUP
Equipment Condition
8 mm combination wrench
Dampening fountain empty
24 mm combination wrench
a.
b.
Replace. (figure 2-75)
(1) Remove two hex-head bolts (1).
(2) Slide fountain assembly (2) out of side brackets (3).
(3) Slide fountain assembly (2) into slots in side brackets (3).
(4) Replace two hex-head bolts (1).
Repair. (figure 2-75)
(1) Unscrew and remove drain valve (4). Replace if damaged or leaking.
(2) Replace drain valve (4).
2-192