TM 5-3610-286-20
2-20.
Main Guard Assembly (cont).
b. Install. (figure 2-22)
(1) Install guard (1).
(2) Install two socket-head screws (2) in D/S frame at feeder end of guard.
(3) Install spacer (3) and socket-head screw (4) at top of guard.
(4) Install one hex-head spacer (5).
(5) Install four socket-head screws (6) at feeder end of guard.
(6) Install two hex-head screws (7) at bottom of guard.
(7) Install four socket-head screws (8) in D/S frame under bottom of guard.
(8) Install three socket-head screws (9) in D/S frame at delivery end of guard.
(9) Install oil bypass valve (10).
(10) Install rubber gasket (11), plate (12), two screws (13), and lock nut (14).
(11) Install oil bypass valve knob (15) and tighten lock nut (14).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install ink fountain guard (para. 2-15).
(2) Install belt guard (para. 2-17).
(3) Install dampening solution container (para. 2-13).
2-84