TM 5-3610-286-10
3-7.
DELIVERY LIGHT MAINTENANCE INSTRUCTIONS (CONT)
REPAIR
1.
Take Printing Press off safe.
Inch until gripper bars are positioned
to allow access to delivery light fixture through top of delivery.
2.
Put Printing Press on safe.
Open delivery safety glass door. Remove
two hex head screws (1) securing fixture to Printing Press.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Remove plastic retaining clips (2) by squeezing and pulling out.
Pull out plastic locks (3).
Twist fluorescent lamp (4) to
Twist starter (5) to left and
Place starter (5) in position
unlock and remove.
pull out to remove.
and twist to right.
Insert fluorescent lamp (4) in position and twist to lock.
Push plastic locks (3) into place.
Push plastic retaining clips (2) into place.
Install fixture on Printing Press with hex head screws (1).
Close delivery safety glass door.
3-27