TM 5-3610-286-10
3-4.
INKING ROLLER MAINTENANCE INSTRUCTIONS (CONT)
1.
Remove ink ductor roller no. 18 (blue).
a. Turn ink supply lever to left (on) position.
WARNING
EXPOSED MOVING PARTS.
All adjustments will be made while
Printing Press is on SAFETY STOP except those authorized
by this manual to be made with Printing Press running.
Printing Press must be on safe at all times when not in
motion.
Always shout clear and wait for clear"
response before taking Printing Press off safe to inch or
run.
Failure to follow this warning may result in serious
injury.
b.
Take Printing Press off safe and inch forward until ink ductor
roller no. 18 is midway between ink fountain roller no. 19 and ink
oscillator roller no. 17.
c. Put Printing Press on safe. Loosen locknut, then turn knurled
adjustment screw to left several turns.
d.
Pivot operator side journal locking latch downward and remove
roller.
e. Store roller in roller rack.
2.
Remove distributor roller no. 16 (white).
a. Grasp handle and pull manual inking roller no. 15 toward delivery
end to disengage.
b.
Remove distributor roller no. 16 from guide brackets above
oscillator roller no. 14.
c.
Store roller in roller rack.
d.
Move manual inking roller no. 15 toward feeder and press down on
handle to lock.
3-13