TM 5-3610-285-14
e. Remove screws, nuts, and washers securing voltage selection switch to chassis.
f. Remove defective voltage selection switch.
g. Solder wires to new voltage selection switch. Secure to chassis with screws, washers and nuts.
h. Reinstall chassis cover and secure with screws.
i. Plug in reflection/transmission probe cable.
j. Be sure voltage selection switch is in correct position for voltage source.
k. Plug in power cord.
7-16.10 Replace Slope Control.
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Needle Nose Pliers
Soldering Iron
SUPPLIES: SLOPE Control
Solder
7-48