TM 5-3610-285-14
d. Remove fuse.
e. Tag and desolder wires from fuse holder.
f. Remove nut securing fuse holder to chassis.
g. Remove defective fuse holder.
h. Solder wires to new fuse holder, and secure to chassis with nut.
i. Reinstall fuse.
j. Reinstall chassis cover and secure with screws.
k. Plug in reflection/transmission probe cable.
l. Plug in power cord.
7-16.7 Replace Zero Control.
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Needle Nose Pliers
Hex Head Key Wrench Set
Soldering Iron
SUPPLIES: Zero Control
Solder
7-44