TM 5-3610-285-14
7-6.2
Initial Adjustments, Daily Checks, and Self Test. Initial (daily) preparation check.
NOTE
For the highest possible accuracy, the densitometer should be turned ON and allowed to reach normal
operating temperatures (one-half hour or more) before performing this adjustment.
a.
Turn on densitometer.
NOTE
If densitometer is to be used with the transmission probe, proceed to step d.
b.
Connect reflection probe to densitometer.
c.
Adjust densitometer for use with reflection probe.
(1) Place fourth-digit ON/OFF switch to ON position.
(2) Place white cali-button in probe tip.
NOTE
Base and target are not used with this procedure.
(3) Press read pushbutton and read display.
7-15