TM 5-3610-259-14
1.4.5.4 REPLACE ON/OFF SWITCH.
TOOLS:
Flat-Tipped Screwdriver
Multimeter
SUPPLIES: Switch
WARNING
DEATH OR SERIOUS INJURY MAY OCCUR
CIRCUIT BREAKER IS NOT TURNED OFF
SWITCH.
IF APPROPRIATE
BEFORE WORKING ON
1.
Turn off appropriate circuit breaker.
2.
3.
4.
5.
6.
7.
8.
9.
Remove two screws.
Remove cover plate.
Remove mounting screws.
Pull switch assembly from wire guide to gain access to wires.
Perform voltage check.
Loosen terminal screws. Then disconnect wires.
Reconnect wires to new switch, then tighten terminal screws.
Guide switch into wire guide, aligning holes.
1-71