TM 5-3610-259-14
7.2.4 OPERATION UNDER USUAL CONDITIONS.
7.2.4.1 PIN PUNCH REGISTER.
1.
Remove from wall mount to working surface and attach punch lever.
2. Set side gage to desired position.
3.
Insert material into throat.
4.
Press punch lever down and punch register holes.
7.2.4.2 VACUUM CLEANER.
1. Using as vacuum.
a.
Attach dust collection bag to air discharge opening.
b. Remove protective screen lock from air intake opening and attach
scrap trap to that opening.
c.
Attach swivel end of
until secure.
d. Attach required tool
e.
Insert plug into 120
2. Using as blower.
hose to scrap trap by turning lock to right
to other end of hose.
V ac wall outlet and turn on/off switch to on.
a.
Attach tapered rubber nozzle to discharge opening.
b. Attach protective screen lock to air intake opening.
c.
Insert plug into 120 V ac wall outlet and position on/off switch to
on.
3.
Using as sprayer.
a.
Attach protective screen lock to air intake opening.
b. Attach swivel end of hose to air discharge opening by
right until secure.
c.
Attach sprayer to other end of hose.
Size of spray pattern
sprayer.
d.
Insert plug
NOTE
turning lock to
is determined by adjusting screw located on top of
into 120 V ac wall outlet and turn on/off switch to on.
7-6