TM 5-3610-259-14
c .
Remove nine socket head screws and right panel, but do not remove five
socket head screws indicated in CAUTION and illustration.
d. Remove socket head screws, lockwashers, and nuts that secure
e.
Lift ballast out of table to gain access to wire connectors.
f. Tag and disconnect all wires.
9*
Install new ballast.
NOTE
Be sure wires are not kinked.
h. Reconnect all wires.
ballast.
i.
Secure ballast with nuts, lockwashers, and socket head screws.
j.
Reinstall right panel and secure with socket head screws.
k. Plug in power cord.
5 - 25